Haltech Platinum Sport Direct Plug-in GM Kit

CAD $1,696.61

Part Number: HT-051100
Suits Australian Market: all VN-VP & VR-VS Manual trans only with DELCO ECU
Suits US Domestic Market: early GM TBI/TPI with DELCO ECU
Camaro, Firebird, Corvette 86-89 (V8 TBI & TPI)
Chev truck/van and S10 (all TBI & TPI)
Requires an I/O Box to accept an input from a Flex Fuel Sensor.
Includes: Pro Plug-in ECU, auxiliary I/O harness plug and pins.

Special Order

Support
SKU: HT-051100 Category:

Description

Supported Models:
Holden Commodore VN-VP – V6 & V8 (Auto and Manual Transmission)
Holden Commodore VR-VS – V6 & V8 (Manual Transmission Only)

Variations:
Calais and Statesman

Features:

  • Direct plug and play replacement of the OEM ECU, no rewiring necessary
  • Uses the cars factory sensors
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • USB and CAN Communication Port
  • Factory Outputs: Fuel Injectors EST Output Fuel Pump
  • AC Clutch Relay Idle Control Torque Converter Clutch
  • Thermo Fan Check Engine Light
  • Factory Inputs: MAP sensor Throttle Position Sensor Air Temperature sensor
  • Oxygen sensor Coolant Temperature sensor Vehicle Speed Sensor
  • 4th Gear / Transmission over-temp A/C Request Park / Neutral Switch

 

  • Expansion I/O*: *Optional auxiliary harness required to be purchased Haltech Part # HT040003
  • 4 x Analogue Voltage inputs 4 x Digital Pulsed Outputs
  • Configurable for Aux Rev Limiter Air Temperature Sensor 2 Air
  • Temperature Switch
  • Examples: Brake Pedal Input, Exhaust Gas Temperature Sensors, Aux Fuel Pump, Flat Shift, Fuel Temperature Sensors, Battery Light,
    NOS Enable, Oil Temperature Sensors, Coolant Temperature Switch,
    Fuel Pressure Sensor, Turbo Timer, Generic Duty Output, External Map, Sensor (Up to 145psi), Transmission Overheat, MAP Sensor, Switch, Oil Pressure Sensor, Power Steering Switch, Nitrous Activation Switch, Wideband O2 Sensors, RPM Switch, Tacho Output,
    Thermofan 2 Switch, Vehicle Speed Switch

Functions:

  • Closed Loop O2 Control Dual Tables Engine Protection
  • Anti-Lag Launch Control Rally Anti-Lag Decel Cut
  • Over Boost Rev Limiter Closed & Open Loop Boost Control
  • Gear Setup Transient Throttle Enhance
  • Correction Tables: Fuel Ignition
  • Air Temperature Correction Air Temperature Correction
  • Barometric Correction Coolant Temperature Correction
  • Coolant Temperature Correction Gear Correction
  • EGT Correction Post Start
  • Gear correction Zero Throttle
  • Injector Dead Time
  • Map Correction
  • Post Start
  • Prime Pulse Time
  • Wide Open Throttle
  • Zero Throttle

Miscellaneous:
Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data, Max 20 channels logging capability
Tune can be password protected in software
Rugged anodized aluminum casing

Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC

Physical Specifications:
ECU Dimensions Length: 154mm (174mm with MAP nipple)
Width: 158mm
Height: 42mm
Weight: 680g (1.5 lb)

Platinum Sport GM Kit Includes:
Sport GM ECU
USB Cable
Programming Software CD
Quick Start Guide
Instruction Manual (on CD)
Haltech Sticker

Additional information

Weight 2 lbs
Dimensions 8 × 12 × 3 in

Reviews

There are no reviews yet.

Be the first to review “Haltech Platinum Sport Direct Plug-in GM Kit”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.